- Cân điện tử LF Vibra
- Cân điện tử ALE Vibra
- Cân điện tử LN Vibra
- Cân điện tử HT Vibra
- Cân điện tử AJ Vibra
- Cân điện tử CJ Vibra
- Cân điện tử SJ Vibra
- Cân điện tử AB Vibra
- Cân điện tử FS Vibra
- Cân điện tử FZ Vibra
- Cân điện tử CUX II Series
- Cân điện tử DME Series
- Cân điện tử GZ Series
- Cân bàn chống nổ AZ B
- Cân chống nổ CZ B Vibra
- Cân chống nổ CZ BS Vibra
- Cân bàn điện tử HJK Series
- Máy in Vibra CSP 160 II
- Máy in CBM 910 II
- Cảm biến lực DFB
- Màn hình hiển thị SDI
- Cân vàng Shinko
- Cân phân tích Vibra
Cân tỷ trọng DME series, Can ty trong DME series
- Tên: Cân tỷ trọng DME series
- Mô tả: Cân tỷ trọng đơn giản
- Giá:
- Xuất xứ: Nhật Bản
- Danh Mục: Cân điện tử DME Series
- Hãng sản xuất:
Notice: Undefined index: brand_name in /home/alex0511/vibra.vn/temp/admin/admin_productform_temp.php on line 240
- Bảo hành: 3 Năm
- Lượt xem: 7850
- Liên hệ: 0912554949
Tệ Trung bình Khá Tốt Rất tốt
- Amazing precision and performance!
Unique test-tank & housing-architecture. -
- Relative Density measurement for the Rubber & Plastic. Suitable for the quality control!
- Test-tank & Housing-architecture Protected the measuring against Over-load and Wind.
- Tuning-fork sensor adopted to the Subaru telescope (most accurate optical telescope) is used. Realize High Quality and High Precision 0.01g.
- Change the weighing-pan, could be used as Precision balance 600g/0.01g.
- High-accurate weighing is maintained by built-in reference weight. (DME-220H only)
* Change the weighing-pan, it can be used as usual precision electronic balance.
1. The water temperature measuring and storing
Do the measurement of the water temperature. Then, set it to the balance. Accurate Relative Density measurement is done by the compensation by the refenence water temperature.
2. Weight a sample in the air, and storing
Load the sample on the Folding weighing-pan. When the weight in the air is indicated, push the Measure-key, and store to the balance the weight data.
3. Weight a sample in the water, and storing
Load the sample on the underwater Weighting-pan. When the weight in the water is indicated, push the Measure-key, and store to the balance the weight data.
4. The relative density and volume indication
The value of the relative density and the volume can be seen with the Mode-key. The delta mark points the symbols of the relative density or the volume on the display panel.
Hydrometer Kit. (Option)
In case of the lighter sample than the water
Cover the sample with attached Underwater Sample Holder, and measure it.
Model | Readability (density) | Readability (volume) | Hydrometer option | Data store condition | Calibration |
---|---|---|---|---|---|
DME-220E | 0.01g | 0.01cm3 | Not-avairable | Fixed condition | External reference weight |
DME-220HE | 0.001/0.01g | 0.001/0.01cm3 | Option | 3 type selectable | Built-in Weight |
Capacity (density measurement) |
220g |
---|---|
Capacity (weight measurement) |
600g |
Readability | 0.01g |
Measuring method | Underwater Replacement Method (JIS Z8807) |
Printer Output | Standard |
Size | 230 × 180 × 170mm |
- RS-232C Output
- Rechargeable battery
(12 Hour Charge, 32 Hour Operable)
* Battery cannot be used with the output as same time. - Hydrometer Kit (For DME-220H only)